FLEX FX2241-Z 24V One-Handed-Labelled Reciprocating Saw (Tool Only) review

FLEX 24V reciprocating saw · FX2241-Z tool-only package

The FX2241-Z is the bare-tool configuration of FLEX’s short-stroke FX2241, a compact 24V cordless reciprocating saw with a 1-inch stroke, variable trigger, pivoting shoe, spring-loaded keyless blade eject and built-in LED lighting. FLEX markets this body as one-handed, but the model-matched manual carries an “always operate with two hands” safety symbol. I therefore classify it as compact-bodied but two-handed in the finder and would not rely on the marketing label to override the manual’s warning.

Compact body, two-hand safety instruction

The exact U.S. page identifies the saw as FX2241 and calls the format one-handed. Its technical table lists 1-inch stroke, 0–3,000 SPM and 4.2 lb without battery. The page’s design language emphasizes maneuverability and vibration suppression. None of those points is a measured cutting-speed or fatigue result. In contrast, the FX2241 manual’s safety-symbol key explicitly says to always operate with two hands. For purchasing, the conservative answer is that this is a small-bodied saw, not a verified one-hand substitute. The manual tells the user to keep the shoe against the work, secure the workpiece, and keep hands away from the moving blade and clamp.

The manual describes a variable-speed trigger and a lock-off button. It specifies a pivoting shoe that may be set to an angle against the surface; it does not state an indexed projection range. The manufacturer lists cutting capacities of 7.9 inches in wood, 1.2 inches in aluminum and 4.3 inches in metal pipe. Those are manual values for the model, not a promise that a particular blade, workpiece or cut setup will deliver the same result.

Blade release and cut setup

The spring-loaded tool-less clamp accepts the blade shank and returns to its locked position; the manual instructs the user to tug the blade to confirm engagement. Turning the sleeve ejects the blade, which may be hot after use. Disconnect the battery before adjustments or blade changes, and direct an ejected blade away from people or animals. The listed body includes an LED near the clamp for work-area illumination. FLEX describes vibration suppression and a counterbalanced gearbox, but does not provide a model-specific test protocol here, so those are design claims rather than quantified review findings.

The FX2241 manual does not document an orbital-mode selector, and the exact page’s feature list does not identify selectable orbital action. I leave that capability unknown rather than borrow it from the larger FX2271 or from FLEX’s broad saw marketing. If an orbital selector is a hard requirement, this record is not a confirmed match.

What the -Z package actually lists

The exact FX2241 product page lists FX2241-Z as “Tool Only” and names the one-hand reciprocating saw plus one 9-inch, 6-TPI nail-embedded wood demolition blade. It does not list a battery, charger or bag for this configuration. The FX2241-1A kit is a separate SKU with a 2.5Ah battery, 160W fast charger, FLEX bag and the same listed blade. A product image or a shared saw-body name does not make those kit components part of the -Z box.

The 4.2 lb figure is explicitly the saw without a battery, making it useful for a bare-tool comparison; it is not the weight of a battery-installed setup. The machine runs on FLEX 24V batteries, chargers and tools. This exact -Z package supplies none of that power equipment. Check that a compatible FLEX 24V pack and charger are already available, and check the blade type against the material and work conditions before purchase.

Best fit and important limits

The FX2241-Z merits a shortlist for someone already using FLEX 24V who wants a compact-bodied saw, modest 1-inch stroke, variable trigger, pivoting contact shoe, quick tool-free blade release and a known 4.2 lb tool-only weight. It is not the choice to make if a documented one-hand operating mode is essential, if orbital action must be confirmed, or if the box needs to include a battery and charger. Those choices point to real differences from the 2.5Ah -1A kit and the longer-stroke, orbital-capable FX2271 family; they are not interchangeable accessories around an identical specification sheet.

This is source-based desk research, not a hands-on test. FLEX’s official product page and the model-matched manual support the details above. Read the exact suffix and written package list, then follow the manual’s two-hand warning, battery isolation and blade installation instructions.