FLEX FX2271-1C 24V Brushless Reciprocating Saw Kit review

FLEX 24V brushless reciprocating saw · FX2271-1C kit

The FLEX FX2271-1C pairs the larger FX2271 brushless saw with the battery and charging equipment needed to start on the FLEX 24V platform. The exact U.S. page lists one 5.0Ah lithium-ion battery, a 160W fast charger, a FLEX bag and two demolition blades. The saw itself has a 1-1/4-inch stroke, 0–3,000 SPM, a tool-less clamp, LED, orbital selector, pivoting shoe and three indexed shoe extension positions. FLEX specifies 7.4 lb without battery, not the loaded kit’s carry weight.

Selectable motion with an important metal limit

The manual’s straight/orbital selector distinguishes a smoother straight stroke from the faster-cutting orbital action described by FLEX. The manual explicitly prohibits orbital cutting when cutting metal. It also says to let the motor stop completely before changing the selector and to lock the tool off and remove the battery before adjustments. These instructions matter more than a generic “orbital” feature badge: the correct mode depends on material and setup.

The variable-speed trigger controls the no-load stroke rate up to 3,000 SPM. FLEX’s exact page and manual specify a 1-1/4-inch (32mm) stroke. The manual lists capacities of 11-13/16 inches in wood, 1 inch in aluminum and 5-29/32 inches in metal pipe. These are different manufacturer specifications for named materials, not one universal cutting-depth rating. Workpiece support, blade length and blade type still govern an actual cut.

The shoe pivots and slides between three positions, which the manual says adjusts the effective stroke length. The saw must not be used without the shoe fitted. Before a cut, the blade must extend beyond both shoe and workpiece over the full motion; otherwise it can strike the work or shoe and break. Keep work secured and the shoe in firm contact. A built-in LED illuminates the cut area, and the manual identifies a saw hook; neither feature removes the need to inspect the work area for hidden services.

Starter package, not just a bare tool

The FX2271-1C Includes list names the saw, 5.0Ah battery, 160W charger, FLEX bag, a 9-inch (229mm) 6-TPI nail-embedded wood demolition blade and a 6-inch (152mm) 8/11-TPI thick-metal demolition blade. That package differs from FX2271-Z, whose listing names the saw and same blade types but does not list battery, charger or bag. The -Z page gives the metal blade as six inches (155mm), so the U.S. product pages disagree slightly in the metric parenthetical; I retain the actual variant wording rather than assume the blade itself differs.

FLEX 24V compatibility is the relevant battery-platform test. The -1C package includes one 5.0Ah battery and one 160W fast charger; the product page does not provide component model numbers in its box list. Do not substitute a tool-only search result or another FLEX package’s battery count. The 7.4 lb figure is explicitly the tool without battery, and the sources do not give the saw’s mass with the included pack or total carry weight with the bag, charger and blades.

Fit and tradeoffs

The kit suits someone who needs a two-handed, full-size reciprocating saw with a complete 24V starter power setup and both listed wood- and thick-metal demolition blades. Its orbital control and sliding shoe provide more setup choices than the FX2241’s documented control set, but the metal-use restriction narrows when orbital action is appropriate. The FX2271 remains heavier as a bare tool than the compact FX2241 at 4.2 lb without battery; the kit’s extra equipment adds further carry mass that is not quantified by FLEX’s weight field.

Before ordering, confirm suffix FX2271-1C, battery and charger are in the written list, the battery is the correct FLEX 24V family, and the blade types match your intended work. Follow manual directions on two-hand operation, battery removal, blade locking, shoe installation, work support and orbital mode. This is desk research from the official package page and model-matched manual—not a physical performance test or ownership report.