Bosch GSA18V-110N 18V PROFACTOR Reciprocating Saw (Bare Tool) review

The Bosch GSA18V-110N is an 18V PROFACTOR reciprocating saw sold as a bare tool. Its documented arrangement is conventional two-handed use, not compact one-handed work. Bosch’s exact U.S. page lists the GSA18V-110 saw, a wood-with-nails blade and a metal-cutting blade; it does not list a battery or charger. That package boundary matters more than a family resemblance to a kit SKU.

A full-size cordless setup, not a pruning saw

The model-matched operating instructions tell the user to put one hand on the handle and the other on the insulated rubber boot over the front housing. They also call for clamping and supporting the work on a stable platform, then keeping the footplate firmly against it. That is why this assessment places the 110N in the two-handed group even though its body is somewhat shorter than some full-size alternatives. A no-cord arrangement may be useful where the work moves around, but the saw still needs a compatible Bosch 18V battery and the operator still needs room to control the two-hand grip.

Bosch lists a 17.7-inch overall length, 6.7-inch height and 3.8-inch width. The page gives a 1.125-inch stroke field and a second 1.1-inch entry; its linked GSA18V-110 manual states 1.10 inches (28 mm). The page and manual both report a no-load rate up to 2,900 strokes per minute. The small difference in displayed stroke value is a source discrepancy/rounding convention, not evidence of two versions. No cut-rate comparison or measurement is implied by these specifications.

Two distinct adjustments change the cut setup

The trigger varies speed with finger pressure, and a separate lever switches orbital action on or off. Bosch’s manual describes orbit as a more aggressive path for softer materials and recommends straight action for thin or harder stock where a cleaner edge matters. This is a choice to make for the material and blade, not a universal “faster” setting. The manufacturer also describes a LockJaw tool-free blade holder with one-handed insertion and spring ejection; the battery must be removed before blade changes or adjustments.

The footplate tilts so it can maintain contact on an angled surface. It can also be shifted along 1-1/4 inches of travel to manage blade exposure and wear, but adjustment requires loosening and tightening screws with the supplied hex key. The manual does not describe indexed positions. Do not confuse the ability to tilt against a work surface with a powered shoe lock or an automatic depth stop. A workpiece that is not secured, or a shoe floating away from the material, undermines control regardless of the footplate’s adjustability.

What the N package does—and does not—establish

The exact Bosch GSA18V-110N product listing names one wood-with-nails blade and one metal-cutting blade. It identifies the selected N variant as bare tool, so plan on sourcing the compatible battery and charger separately. The product page lists the 18V packs Bosch recommends for maximum tool performance; check the exact battery and charger model against Bosch’s current compatibility information rather than assuming every 18V-labelled pack is suitable. The page does not explicitly establish whether a case is included, so this review does not promise one.

Bosch publishes “Weight 7 lb” on the same page but does not state the measurement basis. The bare-tool package suffix identifies the box configuration; it does not prove that the weight field is a measured saw-only value. As a result, this assessment leaves the bare-tool weight matcher blank. Anyone with a strict carry-weight ceiling should verify a clearly defined measurement before using that number to choose a saw.

Where it differs from nearby Bosch choices

The separately reviewed GSA18V-110B14 uses the GSA18V-110 body but has a different box list: it adds one 8 Ah battery, charger and carrying bag. Those kit components do not belong to the 110N. The GSA18V-125N and -125K14A are another saw body, with a 1-1/4-inch-class stroke, different speed and a three-position footplate in their own manual. The 110N’s continuous footplate travel and hex-key adjustment should not be inferred from those models’ quick-release plate or vice versa.

For a buyer already invested in Bosch 18V equipment, the 110N is a plausible candidate when a two-hand saw with orbital selection, a blade clamp and footplate travel is needed. It is a weaker fit if the priority is a verified light tool, an included power kit, or fast shoe repositioning without a wrench. It is not the compact one-hand answer simply because its overall length is below that of some full-size saws.

Research limits and source trail

This is an assessment of Bosch’s published U.S. product record and manual, not hands-on experience. No test cut, ownership, measured vibration, battery runtime, customer rating, price or present stock was assessed. See Bosch’s GSA18V-110 operating and safety instructions for exact blade, work support, battery-isolation and operating guidance before use.