Hilti SR 30 Corded 120V Saw, Hard Case and Six-Blade Kit 3692707 review

Hilti SR 30 corded reciprocating-saw kit · 120V · product 3692707

The Hilti SR 30 U.S. product page has two actual product-number choices, not one generic package: 2228923 lists a corded saw and dust-removal module; 3692707 is titled “SR 30 Corded Saw w/ Hard Case” and adds six reciprocating-saw blades and the SR 30 tool case assembly to the saw and module. This review concerns the latter package. The identity is specifically the Hilti SR 30 Corded 120V model. It is not the separate SR 30-A36 cordless saw, and no battery-system facts should be transferred from that similar name.

The U.S. configurator’s exact package list and the page-linked SR 30 operating instructions are the evidence base here. This is an editorial comparison, not an ownership report, demo, field test or measured performance result. Product-page availability is not a promise of stock from another seller.

The hard-case package is meaningfully different

For product 3692707, Hilti lists one SR 30 Corded 120V reciprocating saw, one dust-removal module, six SPX 6-inch 8-TPI recip blades and one SR 30 tool case assembly. The page’s exact list—not the photograph—supports those contents. The case is a documented kit item, and the six blade count is a package difference from the 2228923 tool-body-style box. The 2228923 product listing names the saw and dust module, but does not list the six blades or hard case. A retailer listing that uses the shared SR 30 image may therefore not represent the 3692707 box; check the full product number and item list.

The dust module is part of the package, but the product page says it works with a compatible vacuum. A vacuum is not in the 3692707 box list. Do not describe the included module as a complete vacuum or a dust-free system. Confirm the appropriate vacuum and hose connection for the intended setup, and follow the site’s dust controls and the manual. A bundled module does not establish a capture rate or remove the need for safe work practices.

The saw itself remains a substantial corded tool

The exact Hilti box page labels the included saw Corded 120V. Its linked SR 30 instructions describe two-handed operation and list 4.8 kg (10.6 lb), a 32 mm (1.3 in) stroke and 2,650 strokes per minute. These are manufacturer specifications. The 10.6-pound figure is for the saw, not the full case, blades and dust-module package. No complete carry weight is published in the reviewed sources. If a ceiling applies to overhead work, the body weight is a meaningful starting point but not a loaded-kit measure.

Hilti identifies a locking-lever blade release for standard half-inch blades, a contact shoe usable in three positions, and its Active Vibration Reduction feature. The product page positions the SR 30 for heavy demolition and names materials including structural metal, cast iron, thick timber with metal inserts and thick-walled steel pipe. Those are manufacturer’s intended-use claims, not a test of the supplied SPX blade or a guarantee for a particular stock shape. Read the blade markings and safety instructions before choosing which of the six blades belongs on a job.

Power planning is part of the product choice. A corded tool avoids matching a battery but needs a suitable outlet, cord management and a work area that keeps the supply lead out of the blade path. The exact U.S. page identifies 120V; the sources reviewed here do not provide a current draw or complete package electrical profile for this exact selection. Do not infer those figures from the SR 30-A36 manual or from an unrelated Hilti saw.

Where product 3692707 differs from 2228923

The body-level facts—two-handed form, 120V mains, 10.6-pound tool weight, 32 mm stroke, 2,650/min rate and three-position shoe—describe the same SR 30 saw. The package-level facts do not: 3692707 adds a hard case and six 6-inch 8-TPI blades, while the 2228923 list does not name either. Both exact U.S. listings include a dust-removal module. If a separate review or retailer page simply says “SR 30,” it may be unclear which bundle is meant; verify the number on the box and compare the purchase contents line by line.

The newer Nuron SR 6-22 and SR 10-22 are cordless alternatives but are different saws; they do not inherit the SR 30’s corded power, shoe or case contents. The WSR 1000 is another corded Hilti saw with a distinct weight and manual-stated stroke. These comparisons help identify system and package differences, but do not establish which saw cuts faster or feels better on a long shift.

Safety, limitations and buying checks

The SR 30 manual calls for unplugging before adjustment or blade service, maintaining two-hand control and keeping the shoe firmly against the work. It warns against cutting bricks, concrete, cellular concrete, natural stone or tile, against cutting pipes containing liquid, and against sawing unknown material. Check the cut path for hidden services, support the workpiece, keep hands clear of the blade and follow the exact manual. A long stroke and hard-case bundle do not override those restrictions.

Product 3692707 is most distinct when a buyer wants a named corded 120V SR 30 with a hard tool case, six listed blades and a dust module in one exact box. It may be the wrong choice if cordless operation is essential, if the full kit’s carrying mass is a hard constraint, or if a compatible vacuum is unavailable. Before ordering, confirm the 3692707 identifier; the 120V corded tool; case, six SPX 6-inch 8-TPI blades and dust module; the separate vacuum requirement; blade suitability; and the manual’s safety instructions. The bundle adds documented equipment to the same saw body, not a tested performance upgrade.